Produktai skirti lauko voleliai (2)

Kabliuko ritininės užuolaidos

Kabliuko ritininės užuolaidos

The OHB hook curtain is characterized by its simple design. The grab bar is attached to one central or two side hooking pins to attach the roller blind to it. The hookin curtain is often used in side or rear windows and in windows in the roof of cabins of agricultural or construction machines. Optimal pricequality ratio Delivery time only 4 weeks Different screw widths possible
Sanafarbe P : Ne toksiška kvėpuojanti dažai, pagaminti iš kalkių skiedinio, skirti vidaus ir lauko darbams

Sanafarbe P : Ne toksiška kvėpuojanti dažai, pagaminti iš kalkių skiedinio, skirti vidaus ir lauko darbams

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l